M2Motoring CF Fab Wing Install and Old wing removal

eight08customs

OK guys Ill break the ice here and be the first to post!!

I will go step by step on How to remove an Old wing and how to install the New M2motoring wing..

Why did I Change out my wing??

The M2Motoring wing is very will made and every detail has been taken to make sure this wing provides customers with 100% Satisfaction. One of the high lights of the M2Motoring wing is is that the seam is unnoticeable.

I hope this topic will help make the install of this wing easier!!!

Anyone in intested in purchasing a wing contact M2Motoring.. if you in Hawaii I have them in stock at Eight08 Customs!!! and no need to wait for it to be shipped!
_________________
Aloha Marshall Scion Evolution Hawaii
Mahalos to!
www.eight08customs.com
www.m2-motoring.com
www.strup.us
www.scionhawaii.com
http://www.myspace.com/eight08customs
http://www.varad.com/index.php

Note: All post made by me is my own opinions made by me.

eight08customs · Posted: Tue Apr 18, 2006 9:24 pm Post subject:

This is the old wing that I had one for over a year!!! It was Stuck!!! Double sided 3M outdoor tape sticks very well!!

I used masking tape to mask off the paint so I dont scratch it when cutting old tape..

Next is to use a credit card or a plastic spreder to cut the Tape.. just take your time.. I used some WD40 to make thing slide more easy..

_________________
Aloha Marshall Scion Evolution Hawaii
Mahalos to!
www.eight08customs.com
www.m2-motoring.com
www.strup.us
www.scionhawaii.com
http://www.myspace.com/eight08customs
http://www.varad.com/index.php

Note: All post made by me is my own opinions made by me.

eight08customs · Posted: Tue Apr 18, 2006 9:27 pm Post subject:

After working down the wing and cutting the tape.. you can winggle or pry the wing off.. Now the hard part is next.. Due to the wing being on the car for over a year and having the tape set in hot sun.. there going to be alot of goo stuck on the car.. Use Goo Gone, Accetone, Wax and maunal labor with your fingers to remove all Goo..

_________________
Aloha Marshall Scion Evolution Hawaii
Mahalos to!
www.eight08customs.com
www.m2-motoring.com
www.strup.us
www.scionhawaii.com
http://www.myspace.com/eight08customs
http://www.varad.com/index.php

Note: All post made by me is my own opinions made by me.

eight08customs · Posted: Tue Apr 18, 2006 9:35 pm Post subject:

Now that the old wing is removed and all the goo gone! Now either use alcohol or accetone to remove oils and wax so that the tape sticks..

Now what I do is mark center using masking tape.. mark the body and the wing for center.. this makes it more easy to line up..

Now wipe the Wing, where you will apply the double sided tape with Alcohol or accetone.. and apply the tape... test fit to see were you might have to double up onthe tape and add onemore layer...

After you have test fit no remove the backingon the tape and you pretty much have one try at this.. so make sure you line it up right.. just stick the bad boy on and install the clips..

Now your Done!!!
_________________
Aloha Marshall Scion Evolution Hawaii
Mahalos to!
www.eight08customs.com
www.m2-motoring.com
www.strup.us
www.scionhawaii.com
http://www.myspace.com/eight08customs
http://www.varad.com/index.php

Note: All post made by me is my own opinions made by me.

kauaibB · Joined: 26 Mar 2005 Posts: 214 Location: kauai, hawaii

very nice write up and nice product....i used wd40 and like 10 lb. test sugi to remove my wing...didnt scratch the paint, good idea to tape off the area as well too though...i didnt just cuz the fact i was getting a new trunk any way...

dbgchef · Posted: Wed Apr 19, 2006 3:56 pm Post subject:

Very nice Marshall, thanks for the tips. were do the clips go?? sorry im a noob and will be looking for a wing someday.

Chef AKA Andy
_________________
Andy AkA Chef

Sponsors-
www.magnaflow.com/ ,
www.ScionSportTuning.com ,
m2 Motoring,
K&R Digital Vinyl and Graphics,

P.B.I,TWB and T.L.W

Go Team Red Cup!

eight08customs · Posted: Wed Apr 19, 2006 11:33 pm Post subject:

yup adiran that old wing is hard to remove!!! especiallly tape!!!
_________________
Aloha Marshall Scion Evolution Hawaii
Mahalos to!
www.eight08customs.com
www.m2-motoring.com
www.strup.us
www.scionhawaii.com
http://www.myspace.com/eight08customs
http://www.varad.com/index.php

Note: All post made by me is my own opinions made by me.

bB · Joined: 01 Jan 2007 Posts: 4 Location: Richmond, IN

Nice job, thanks for the write up. Where can I get a wing like that? I see cf wings on ebay, is that the one or different? Also, we did not get a factory wing on ours, so do we have to drill holes or can the wing just go on with the 3m double side tape? Thanks!